How To Activate And Register The New MagicJack Plus 2014

VocalTec has oft been criticized for in the past for saying that the first magicJack plus device didn’t require a computer to be used when a computer was indeed needed in order to initially register and activate the device. This is actually still the case with registration for the new 2014 magicjack Plus but there is a slight difference in that the device can be plugged in and used immediately without the need for any type of registration. You can then register it at a later date where you will still need access to a computer. Official instructions for registering the new device are listed below.

The new 2014 magicJack PLUS can be used both by plugging it into your modem/router or by plugging it into a USB port on your computer (PC or MAC).

Using the new 2014 magicJack PLUS with a computer

1. Plug the NEW magicJack PLUS into a USB port on your computer (PC or MAC)

A. If using a MAC, double click the NEW 2014magicJack PLUS icon that appears

B. If using a PC, the NEW 2014 magicJack PLUS software will load automatically

You are now ready to make and receive calls.

Using the new 2014 magicJack PLUS without a computer

1. Plug the NEW 2014 magicJack PLUS into the power adapter that has been provided

2. Plug the Ethernet cord that has been provided into the NEW 2014 magicJack PLUS

3. Plug the other end of the Ethernet cord into your modem our router

4. Plug a telephone into the NEW 2014 magicJack PLUS

5. Plug the power adapter into a power outlet

You are now ready to make and receive calls

 

To register the new 2014 magicJack PLUS:

Without a computer:

1. Plug the NEW 2014 magicJack PLUS into the power adapter that has been provided

2. Plug the Ethernet cord that has been provided into the NEW  2014 magicJack PLUS

3. Plug the other end of the Ethernet cord into your modem our router

4. Plug a telephone into the NEW 2014 magicJack PLUS

5. Plug the power adapter into a power outlet

6. Visit mjreg.com on your computer, tablet or smartphone

IMPORTANT: Your computer, tablet, or smartphone must be connected to the same network as the new 2014 magicJack PLUS to be able to register

With a computer:

1. Plug the NEW 2014magicJack PLUS into a USB port of your computer (PC or MAC)

a. If using a MAC, double click the NEW 2014 magicJack PLUS icon that appears

b. If using a PC, the NEW 2014 magicJack PLUS software will load automatically

c. Click on “Click Here To Register” in the left window of the NEW 2014 magicJack PLUS SoftPhone

2. Follow the on-screen instructions to register with your personal information. You will be given the option to select a number during this registration process

 

This entry was posted in How to Install Magic Jack, Magic Jack, magicjack Plus 2014, magicJack WiFi, mjreg.com, New 2014 MagicJack Plus, www.mjreg.com and tagged , , , , . Bookmark the permalink.

15 Responses to How To Activate And Register The New MagicJack Plus 2014

  1. how can I obtain a phone number for the free calling service?

  2. ED says:

    I plug my new mJ+ into a USB port on my Windows 8 machine and the software does not install automatically. Is this a defective device or is there a known problem with Windows 8?

  3. harka says:

    i don’t know how to activate magicjack this is my first time

  4. william bailey says:

    I tried to keep my previous number but I had cancelled it with previous provider before I hooked up with magic jack. How can I get a new number as right now I can only phone out.

  5. glen bynum says:

    this MJ 2014 modle does not install correctly with my window 8 cpmputor nor due I get a registration screen. All upgrade dnloads were useless as TS by local techs did not get it to work, MJ online service was worthless along with cable support (they had no info) So much for the ease of installation! What crap!! I was able to install in power recept and router to get it up working, but guess what? The registration page no workee!! Now how do I apply my old MJ acct phone number from an older 2011 MJPlus which is expiring tomorrow?

  6. glen bynum says:

    Is this a defective device? I received it from Magic jack on line advertisement in oct 2013 for $41.99 My calls to magicjack business office were not helpful. How can I get this resolved?

  7. VanguardLH says:

    That author never does reveal what difference or advantage by registering. That the dongle even permits registration must mean something is different between a non-registered and registered dongle. “Begin making calls” could mean you can make outbound calls but cannot receive inbound calls because registration is what assigns a phone number to your dongle. That’s just a guess because the author was absent to mention just what features are available in a non-registered dongle.

    Although the hype for “The New 2014 magicJack Plus+” product is that it supports wifi, it does not as yet. The product has been out for awhile but wifi support has not yet been enabled. When contacted, the company won’t release information about when they plan to enable the wifi feature. So all customers that bought the Plus+ (wifi) version are finding wifi is not usable. Hopefully the new chip, more memory, and other hardware features will provide better quality and get rid of the too often occurring echoing and cutouts so customers are getting something more when paying for the new still-wifi-crippled wifi-version of the Plus dongle.

  8. I already have magic jack I want to know how I can activate and reregister it again

  9. sharon Robinson says:

    I received my new majic jack plus has not been able to get it to work please call me at 904-505-3080 to help me get it up and running the cords are to large for my router what else can i dO

  10. hopeful says:

    MagicJack needs to list an e-mail address and a phone number where they can be reached. I didn’t want to use a credit card. I want to be billed at my snail mail address. Also, I don’t want to pay for 911 calls but there’s no way to arrange to do either on the registration page that I can see. It just blips you from one page to another without giving a choice.
    Aggravating to say the least.

  11. roberta reid says:

    I need help setting up my Majic Jack Plus.

  12. RC says:

    I attempted to register the MJ+2014 , but MJ+ only loaded the software. The pop-up windows did not showed up for registration. I shut down both the Windows 7 firewall and the avast antivirus and plugged in the MJ+ again, but no luck at all. I re-activated the Windows 7 firewall and avast antivirus again, then I removed the MJ+ software. This time I deactivated Windows 7 firewall and the antivirs first. I plugged in MJ+ to reload the software. The pop-up windows for MJ+ registration was enabled.

  13. Chat Van Le says:

    i need help setting up my majic jack plus.

  14. Zeric Gordon says:

    My Magicjack Plus is telling me that there is a system error, I must try again later. But every time I try again it is telling me the samething.

  15. Karen Smith says:

    When I first received my magic jack plus it worked fine. Now it’s not working. What do I need to do to get it back working?

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>